Let’s create an Original Botanical Pattern!

8,193

Cherrzart

Cherrzart

1. What's a Pattern ?

A. Introduction

Hello! I’m Cherry and I’ve come with yet another Super Detailed exciting tutorial.

Starting from concept to design : I’m going to walk you through a step-by-step Tutorial to help you design your own Original patterns Using Clip Studio Paint.

B. Pattern

A pattern is an arrangement of different shapes and designs on repeat.

It can be a simple pattern (designs on repeat) or what is commonly known as a seamless pattern : a repeating pattern without any seams or interruptions.

In this tutorial I will be showing you how to make a seamless pattern in a number of ways and we’ll take a look at how to make a simple pattern at the end since it’s very easy.

And it can be used for anything : Wallpaper, Packaging paper, and Fabric/Clothing patterns…

An appealing Pattern is more often than not made of designs from the same niche : Food Pattern, Space, Fruit, Children Oriented… Etc

2. The Concept

A. The Idea

First write down your Idea.

As easy as it seems, this step is important in order not to get lost between the several inspirations you might have along the process.

Define what you want early on : What’s the theme of your Pattern ?

Is your Pattern Botanical ? Science Themed ? Ocean Themed ? Children Oriented …Etc

If you’re not sure what to make, you can choose a theme that relates to what you want to use the pattern for.

For Example : Let’s say you want to make a science notebook cover so the theme is Science, like Laboratory equipment or Scientific Symbols (write that down and expand on themes relatable to the idea).

For this Tutorial I will be making a : Botanical Pattern.

B. The Elements

After you have decide on the concept :

-Write down the elements that make up the chosen theme.

-Gather reference : Explore the various types, designs and shapes of your elements so that you can have a general idea what your pattern will look like before moving forward.

Back on the example of a science notebook you should be looking at reference for elements like : test tube, measuring cup, microscope…etc

Since I will be making a Botanical Pattern, my elements will be : Flowers, Leafs, Plants.

So I looked into several kinds (types) of flowers, plants and leafs and gathered my favorites in a Board to use as a reference then made rough sketches to see what they would look like.

 

 

3. Illustration Creation

Since this is not a tutorial on Drawing or Rendering I will only give you what you need to create pattern Elements while explaining the variety of Clip studio Tools.

A. Creation from scratch

Open Csp → Go to File → Create a New Canvas (Type in the width, length, resolution, and canvas title).

- You will then have a new layer where you can draw.

- To your right is the layers window where you can adjust the Opacity of the layer Change the Layer Mode and Add new Layers.

- To your left is the Tools window where you can find a variety of default brushes and tools.

Then (Based on your previous references) draw a rough sketch of your elements (I drew mine using the default “Pencil”).

 

 

Try and make at least 3 different elements to have some variety in your pattern design.

Then lower the opacity of the sketch layer → Create a new layer and Make your line art (I made mine with the pencil again).

Draw every element on a separate layer on its own.

Select One element’s Layer → Create a new layer For the base color/rendering of that element (Hold it and drag it beneath the line art layer).

Then select Both Layers → Drag them over to the folder icon and they will be put in a folder.

Then lay your colors on that new layer and render (I will skip rendering since it’s not our topic but you are free to check my previous tutorial on how to draw and render flowers).

After that Click on the folder → Right-Click on your mouse → select “Merge selected layers”

After you’ve finished rendering that element → Turn off all other layers (including the background layer) by clicking on the eye icon next to each layer → Use the selection Tool to Crop the canvas to your element size → Go over to “file” → Export image as a “PNG”

Then Repeat the same process with all of your elements creating “PNG” Images (it means there is no background which gives us the freedom to choose and try out different backgrounds later).

B. Ready-to-use Elements

If you don’t want to manually draw your own Elements, there is another way to make them :

-Take pictures of the elements/objects you want (I took this image on my phone).

-When taking the picture, Put a white background behind the object (I put a white paper) so that we can turn it into a Png easily.

-Import the image to Csp.

-Go over to “edit” → Tonal correction : There you can find different tools to adjust the color, light and vibrancy of your Image.

-To make the image a bit brighter while keeping the contrast select : Brightness/Contrast

-Pick up the “auto select” tool : This tool selects a large area that is defined by shape. since we have a white background it will select the background but it might miss or add some bits that aren’t supposed to be selected (since the image is not high quality).

-So After you made a general selection, pick up “selection area” tool and choose lasso or preferably “selection pen” and add (+) or remove (-) selection from background.

-After you’ve made a clean selection of the background : click “delete” on keyboard then export the element as a png file.

Please be mindful of the objects you take pictures of and revise the terms if there is any restriction to use them in your work.

4. Setting up the Pattern

There are several ways to create a pattern in Clip studio Paint.

-Create a new Square layer (a minimum of 2000 x 2000 witha 300 Dpi for a good quality print)

-Import all of your previously made (or ready-to-use) Images (Png).

-Now let’s arrange the elements in 3 different methods :

A. Figure Ruler

The first Method is to use : Ruler Tool (U) : This tools has many sub-tools, each with a unique feature. (Feel free to check my previous tutorial on perspective ruler).

The Figure ruler allows us to create a a ruler to guide us, it’s most important feature is that the selection tool snaps to it (sticks to the edge). Let me explain it more through out the process :

-Pick the Figure ruler : Square Shape

- Hold and drag the ruler while pressing “shift” on keyboard to create an even square.

-Right-click on the ruler layer → select “show in all layers”.

Start arranging the elements (Png images) one by one.

Let’s first place some elements on the edges before filling the whole square.

The concept is that the top edge should complete the base of the square and the left edge should complete the right edge of the square without any seams or interruptions.

-Starting with one element, place it somewhere around the edge of the square : a part of it inside and a part of it outside.

-Place it so that it shares two edges of the square (Top meets base/right meets left) but not 3! Don’t place it at the angle of the square.

-Right click on the element layer : select “Rasterize” (This will allow you to make a selection and move it to the other edge.

-Make a selection of the part of the element that is outside of the square and move it to the the opposite edge that meets it (top with base and left with right).

-After you’ve made the selection → click “scale/rotate” tool to move while pressing “shift” to move in a linear direction.

Zoom in to make sure that it meets the edge of the square well, otherwise there will be an apparent interruption of the pattern.

Then simply repeat the same process with all of the other elements (or how many you want at the edge) filling out the edge of the square first then the rest of the square.

 

 

You are free to leave the background white or fill it in a different color by creating a new layer : drag it beneath all elements and fill in with bucket tool.

-Make a “clean” selection of that square (it should be easy because the selection will snap to the figure ruler square but zoom in to make sure it’s clean).

-Crop canvas to this new square.

-Delete ruler layer by right-clicking in the layer and choosing “delete layer”

-Right click on any layer and click “flatten image”

 

 

-Go to “edit” → Register Material → Image.

-Make sure to check ‘tiling’ and ‘repeat’ mode then choose a file to save your image material.

*Your pattern image is now saved in material*

 

 

-Go to material window → search for your image directly in the folder you saved it in or by typing the name on the search bar → click, hold and drag to the canvas.

adjust the image to your liking and there you have a pattern.

Ps : Element Arrangement

For the placement of the elements : It is very objective but generally speaking you should :

1-Separate your elements into two categories : main elements (Big and Obvious) and minor (filler) elements that come in a smaller shape to fill the pattern.

This doesn’t however mean that you can’t play around with the size o either.

2-Play around with the size and direction, flip and rotate to explore the potential of your elements and make a fun pattern instead of a repetitive one for visual interest.

B. Import Pattern

If you don’t want to register your image as image material or you just want to stop at the creation of the pattern image : No problem!! Clip studio has made it so that you’re not obliged to do so.

-After you Export the previously made pattern square as an image.

-Go over to “File” → Import → Choose : Pattern from Image : This option will automatically turn the image into a repeating pattern → Choose your Pattern image and there you have a pattern.

C. Change Canvas Size

The second method to create the pattern square :

-For this method it is better to fill out the background color beforehand.

-Go over to “edit” → Change canvas size → Increase canvas size by a 1000 or 2000 to have enough space for the excess of the elements (but keep it square).

-Your previously (background) filled square can now be now a selection on its own.

 

 

-Import your elements and place them like earlier.

-Right click on the background layer → selection from layer → create selection : this will select the square : invert selection to select and move the outer part of the element (make sure you’ve selected the element layer).

-Move while holding shift like earlier and do the same thing with other elements.

-when you’re done : select the square again and crop the canvas and continue on like we did earlier to create a pattern.

D. Grid Method

Yet another method is to use the Grid :

-Go over to “view” and click on “grid” to have it appear on the canvas

-Go again to “view” and click on “grid/ruler bar settings” to adjust the grid and number of squares : make them big and apparent for pattern purposes.

The grid tool (as well as the figure ruler) allows the selection tool to snap (stick) to it, moving according to its squares without deviations which allows us to make clean selections. (It’s usually activated by default but make sure all “snap” options are on).

-Make a square selection, fill the background color and place your elements and continue on like we did earlier.

 

 

another way to use the grid tool is by placing each element in a square creating a pattern that way (not seamless) :

E. Different Pattern

Instead of separate elements :you can crate continuous abstract shapes.

-Make a square canvas.

-Create abstract shapes (or an illustration that could become continuous)

-Turn on the grid

-Make a selection splitting the canvas into two horizontal halves and separate them in two layers.

 

 

-Switch sides : Move the top half to the base and the lower half to the top (they should be sticking to the edge to avoid any seams).

-make more abstract shapes filling in the gaps and connecting to the previous shapes.

-Split again

-Move the top to it’s original base side and the base to the top.

-Repeat the same process by slitting the canvas to two vertical halves, make more shapes and connect the loose ends and then bring each half back to their original places.

-Flatten image and register image material.

-There you have a beautiful abstract pattern (it would be even more beautiful with colors).

 

 

While the two methods are very similar, this one is more efficient for abstract shapes and not very suitable for define separate elements like the previous flowers.

Feel free to explore and experiment with both methods.

5. Conclusion

It might seem a bit complicated at first but It’s very easy to create patterns and invent new ways for interesting patterns from which you can create illustrations, notebooks, merch…etc

I hope you learned well and enjoyed my tutorial.

Thank you for your support!

Comment

New

New Official Articles