■ Soap bubbles

First, prepare the black layer. *Because it is easy to see

Cut out a circle from this image. You may use this. (Can it be used?) *Anywhere.

Shave with a transparent airbrush. Cut the lower part more.

Edge pink and light blue to blur the edges.

Draw the surrounding area with a white airbrush. I draw a lot of red circles.

It is completed with glitter.

■ Sunglasses

Get your sunglasses.

Prepare a new layer and make a base.

Clip a pink to purple gradient on a new layer.

Add a new layer for clipping and draw with a white airbrush.

It's a bit difficult here, but add a new layer for clipping and draw fences. * Be aware of curves. The base is brown and the edges are red.

Add a new layer of clipping and insert a white line diagonally with a straight line. Then shave with a transparent airbrush.

Color the edges of the sunglasses.

Add a new layer for clipping and draw the bottom one in pink. Then blur it.

Add a new layer and add glitter.

■ sea

Make the upper part blue, gradually making it light blue and apply the color of the beach to the end.

Add a light emitting layer and set colors such as light blue and blue.

Filter transformation → Waveform (F) → Change the wave shape to a rectangular wave.

Set it like this.

Draw a ripple. I drew it with an airbrush. Duplicate the layer, change the color and shift it a little.

Paint the dark areas of the ripples white.

■Water surface

Add a new layer and play around.

Use the fingertip tool to draw a distorted round object.

Duplicate the upper layer into a light emitting layer, flip it left and right, and leave both left and right. *The upper two layers are hidden.

If you display both of the above two layers, you will see the above.

Duplicate the layer to emit light.

■ Bed

Use the airbrush as a light emitting layer. Then blur it. The color should be a little lighter than the first floor layer. The trick is to properly draw dark and light areas.

Download flooring material from Crysta. Then paste it. The front is lengthened by free deformation so that the depth can be obtained.

Duplicate the floor line drawing and thicken the line drawing with a filter to make the color dark brown. Then, shift it to emit light. Then a groove will be created.

■Water drop

Draw the shape of a water drop.

Apply with a light blue airbrush. At this time, it is good if there are light and dark areas.

Draw in dark blue.

Add the black part.

Draw the white part. Draw it so that it is bordered.

It is good to draw various shapes.

■ Wine

From here, separate all layers so that you can modify them.

Put a little gray.

Draw it in white to make a border. However, there are some areas that are blurred.

Draw the luster of glass. There is also a place to thin the white part.

Draw the reflection. First of all, draw thickly. *I drew it on the assumption that there is a window.

 

Apply a little with a light blue airbrush.

Draw the black part.

Draw wine. Blurs the back side.

Draw the shade of wine.

Draw a darker shade.

Uses the color of wine to emit light.

Put the surface color.

Light a little white on the surface.

It is like this to cut from a thick place.

■ Water ripples

Draw a circle.

Use the filter → transform (T) → spiral (S) to make a spiral.

Draw with a fingertip tool.

Duplicate and invert to make a light emitting layer.

Duplicate and invert to make a light emitting layer.

Duplicate and invert to make a light emitting layer.

Blur or blend with a fingertip tool.

When it is thin, it looks like this.

■Light

Do this with a dense flash on another layer. Download required.

Gaussian blur.

Duplicate it and make it dark yellow to emit light.

Duplicate it, and make it dark blue this time to emit light.

■Sunlight

Prepare an empty gradient. Separate the layers so that you can move them from here.

Move the light created above to the upper left.

Draw a ring with dark red or blue to make it blur. Then make it emit light. I hope there are points.

Draw a straight line with white or blue. Then blur it.

Direct setting turns on and off.

Draw a dark pentagonal color with a tool like this.

Let it fire.

Set the opacity to 50%. This is completed.

You can cut it.

Download clouds

Do this with an airbrush.

Let it fire.

■ Ice

Prepare the lightness and saturation of the ripples on the surface of the water in this way.

Please pay attention to 〇. Crop the image. (anywhere.)

Draw smooth and dark areas.

Do this with an airbrush.

It is completed by emitting light.

■ Stained glass

Prepare a line drawing of stained glass.

First, draw roughly like this.

Filter → Transform (T) → Waveform (F) Make a square wave.

It looks like this.

Back in stained glass, separate the colors in a new layer.

Make the stained red base green and clip it.

Clip it by color. A new layer is added to the rose to create a shade.

■Sunset and sea

First, create a gradient like this.

Separate the sea and sky into separate layers.

Draw a wave with multiplication.

Use an airbrush to thicken the back.

Draw a wave using a darker color than above to make it fire.

Draw a small wave to draw.

 

Draw a small wave using a color brighter than the one above to make it fire.

Draw the highlight in white.

Make it shine with a glitter brush.

Add a new layer above the empty layer and clip it. Then draw with an orange airbrush.

Paste the light and draw with a cloud brush.

The layers are integrated and only the sea is blurred with Gaussian blur.

■ Sunset Sea Layer Details

It is a layer before light emission and multiplication.

Multiply

It is as it is.

Let it fire.

Let it fire.

Let it fire.

Let it fire.

 

■ Get wet

It will look wet if you apply a dark color.

■Mirror ball

Prepare black.

○ and the mirror ball line drawing are prepared.

Fill the color with this color.

Spray with air spray.

Do a muffled spray.

Fill the color like this in the new layer.

Make it 50% opaque and emit light.

Duplicate the layer you made earlier to 30% and flip it upside down.

Draw a shade in black.

Add highlights.

Add glitter.

Add the same glitter with a dark blue color and slightly shift it to emit light.

Make the black background dark brown.

Apply gently with a blue airbrush.

Scatter the triangles.

Draw a similar triangle with dark blue to emit light.

Next, draw a triangle in light blue to emit light.

Draw a small rainbow color around it. ○ and the line drawing of the mirror ball are integrated, a new layer is added on it, and it is clipped in a rainbow gradation.

It is completed by adding glitter.

 

■ Splashes

Three colors are prepared for easy understanding.

Draw water drops of a darker color than that.

① Shave with transparent airbrush or

② Add a new layer and paint the background color with an airbrush.

Draw a shadow with a dark color.

Turn on highlights.

■ Neon

Download and draw a neon pen. I will put a sample of the picture.

■ Reflection

First of all, draw the illustration in the window. Then, prepare a state in which the layers are divided and a state in which the person reflected in the window is layer-integrated.

Fill with light blue.

Prepare a background and set the opacity to 50% and clip it.

Clip the layer-integrated one with opacity of 30%. However, if you paste it as it is, the building will be transparent to the person's place, so remove the background only for the person's place. Add a new layer and draw the gloss of the mirror.

↓

Draw the luster of the mirror.

It's hard to understand, but I'll add some highlights to my eyes.

You can use it at night or in the rain.

If you apply it with a white airbrush and shave it, it looks like it blows on the glass and is rubbed by hand.

■ Peach tea

First, draw an illustration of an empty teapot.

Draw black tea in brown.

Apply with the red color of the airbrush.

Apply it with a brown airbrush as a luminous layer.

Paint the surface.

Add a light emitting layer and paint the bottom part with a slightly light brown color.

Add a light emitting layer and add a lighter brown color.

Add an emissive layer and lightly apply with the first brown brush. (With a cloud brush)

Prepare a transparent background and layer combination.

Paste it on top and make the opacity 50%.

Draw the luster of the glass itself.

Draw the reflected light. (?)

Apply with a light blue airbrush.

It's fine, but I will put a highlight on the border of the tea. done.

■ A more realistic soap bubble

Prepare a black layer for easy understanding.

Prepare a light blue circle.

Do this with an airbrush and a cloud brush.

Put a white highlight around the soap bubble.

Add more white highlights.

Draw the black part. Make it symmetrical.

Airbrush in green.

Choose a darker color than the one you painted colorfully and draw with a cloud brush.

Blur slightly with Gaussian blur.

When the background is blue, it is nice to change the black part to blue. In other words, it matches the background below.

■ Bonus

■ Finally

Thank you for watching. I'm not good at drawing, but I'm happy if I can help.