BigField style: Digital manga art series # 13 Individual management

Basic method of my style manga Auto action format

The main part is # 13 of the "Big Field style digital manga art series".

★ Series parent link name: BigField style digital manga art overall management

(BigField-style digital manga series # 01)

【change history】

・ 2020.10.03: Added "05 ● Layer order change and alignment processing auto action"

・ 2020.07.05: Added "04 ● Auto-action of logical processing of mask area"

・ 2020.06.21: Added "03 ● ..." item

・ 2020.06.16: Added description to "01 ● ..." item

・ 2020.05.17: CLIP STUDIO SHARE released

・ 2020.04.30: Addition of Auto Action 02 "Before taking a picture ..."

・ 2020.04.28: First edition-TIPS released

・ 2020.03.24: First edition coming soon

 

・ Before this, I moved to the end of the book! (If you exceed 10 lines, move to the end of the book)

 

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■

■ 1: Basic method of my style manga

● 13 Auto action format (CSP: V1.9.11)

★ Link name: Big Field style digital manga series # 13

Basic method of my style manga Individual management: 13 Auto action format

★ Please use Auto Action at your own risk!

● Auto action (CSP: as of V1.9.11)

Among the management items displayed by clicking "3" on the upper left of the "Auto Action" palette

The following functions are explained.

 

Top left "three" management items

・ Addition of auto action or ★ Icon at the bottom right (third from the left)

-Duplicate auto action to another set

・ Create a new set or ★ Icon on the upper right (first from the left)

・ Delete set

・ Set settings

・ Export set

・ Reading the set

・ Register the set as a material

・ Read the set material

 

<How to name>

Add "0001", "0002" ~ to the beginning of the auto action name.

 

<Registration to material>

-For each auto action, execute the management item "Register set as material" to go to the material.

Save it.

-Set the sorting method <addition date / time / ascending order> in the management item of "three" on the upper left of the material.

-The registration order of each auto action is the reverse order of <Title / Ascending order>.

That is, the order is "000n" to "0002", "0001_". (★ Important)

On the material, <Title / Ascending order> and <Addition date / Ascending order> have the same appearance.

 

<Processing of saving user data to a PC>

Follow the procedure below to save the insurance that summarizes the auto actions to your PC.

Since individual auto actions are registered for the material, the ones for insurance are summarized.

Save all at once.

 

Currently, auto actions cannot be sorted in any format.

In order to forcibly align, in order from the PC and materials saved after erasing all

Must be read.

In order to achieve this, it is important to write on PCs and materials on a daily basis.

 

Instead of this, here we create one auto action set and feel free to do it internally

I will explain how to change the order and cut out into a single set if necessary.

For the first time, assume that you have several independent auto action sets.

 

[How to organize and save materials]

・ Create new set → Name is "For saving all auto action sets" (first time only)

Creating a new set or ★ Icon on the upper right (first from the left)

・ Addition of new auto action in the set "For saving all auto action sets"

Addition of auto action or ★ Icon at the bottom right (third from the left)

-Rename the auto action → "●"

(Duplicate another set below this and set the name)

 

<Procedure>

・ Repeat ▼: Beginning

-Display the set of replication source

-Copy the set name (execute the management item "set setting")

 

-Select all lines → Execute the management item "Duplicate auto action to another set"

(Specify the set "for saving all auto action sets")

-In the set "For saving all auto action sets", after "●", the set name of the replication source

Paste the auto action name = ● It becomes the "duplicate set name".

・ Repeat ▲: End

 

・ Next repetition (beginning to end)

-After all is completed, save the set "For saving all auto action sets".

(Execute the management item "Export set")

• Supplement: Copy: F3 (or Ctrl + C) Paste: F4 (or Ctrl + V)

 

<Ascending order alignment method of auto action>

Currently, the auto action palette cannot be arranged in title order.

 

Therefore, the auto action registered in the material and the full replacement process are executed.

-Under the following conditions, delete all items saved in the material of the previous auto action.

Conditions: <Title / Ascending order> and <Addition date / Ascending order> on the material

If they do not look the same

-Re-register all auto actions to the material as before.

・ Create a new set → Name is "★"

Creating a new set or ★ Icon on the upper right (first from the left)

-Read auto action from the material.

(Execute the management item "Load set material")

-Multiple auto actions to read can be selected and batch reading is possible.

-Delete processing of old auto action items (from the beginning to "★")

Select the first auto action set and delete it.

If you delete it, the following items will be selected, so execute until "★"

(Execute the management item "Delete set")

 

<Improvement plan: Abolition style of individual auto action items>

-Do not create individual auto action items = "0001_auto action name"

As it is, directly inside the set "For saving all auto action sets"

Create "● 0001_auto action name" ~.

If you do this, the registration to the material is only set "for saving all auto action sets"

The registration time will be reduced.

Separate a series of sets "● 0001_auto action name"

You are free to create and use "0001_auto action name".

 

<Procedure to cut out individually from the set "For saving all auto action sets">

-Individual auto action to cut out in the set "For saving all auto action sets"

"000n_auto action name" excluding "●" in "● 000n_auto action name"

Copy it. (F3)

・ Create new set → Name is "000n_auto action name" (paste with F4)

Creating a new set or ★ Icon on the upper right (first from the left)

-Individual auto action to cut out in the set "For saving all auto action sets"

Select multiple lines below except for the part "● 000n_auto action name".

-Execute the management item "Duplicate auto action to another set"

(Specify the set "000n_auto action name")

-In the set "000n_auto action name", the highest level created when creating a new set

Delete the default "Auto Action 1".

 

<Supplement>

・ When changing the contents of the set part

-Change the inside of the set "For saving all auto action sets".

-Cut out individually to the target set by the above procedure.

-Select the old line before the operation and delete everything. ★ Lower right icon (4th from left)

・ When registering to the material of the set "For saving all auto action sets"

-Before registration, add or delete the identification code at the beginning of the target item in the material and mix the same name

Avoid being present.

・ Saving process to PC

-Save as usual. (However, it will be overwritten)

 

<Arrangement of "● 000N_each set" part inside "For saving all auto action sets">

Currently, your set name is displayed in the copy destination of "Duplicate auto action to another set"

It will not be. That is, you can duplicate it with a command in your set, but you cannot move it.

 

It cannot be moved by command, but it can be done manually.

If you use "Shift" or "Ctrl" to select multiple auto actions and then drag

You can move. Unnecessary auto actions must be selected and deleted.

It's a little troublesome.

 

<When changing the set cut out from "For saving all auto action sets">

When changing the auto action in the cut out set, "auto action is different

You can duplicate it with the set "For saving all auto action sets" with "Duplicate to set",

It cannot be easily moved inside.

You can move it manually by force, but it is a little troublesome.

 

Therefore, the auto action being managed in the set "For saving all auto action sets"

One way to change is to cut out from the set "For saving all auto action sets"

It's easier. However, it is necessary to manually delete unnecessary parts in the cutout destination set.

 

 

01 ● Improved rasterization of the border of the frame frame folder ("07 frame division")

Created by rasterizing the border of the frame frame folder as described in "07 Frame split"

If you move the border inside the folder, the size of the border will be halved due to mask processing.

I created an auto action to make up for the shortcomings.

The frame frame folder will be described for the duplicated frame frame folder.

Instead of rasterizing the frame frame folder every time, create a template as shown below

Instead of doing it, create a template as shown below.

02 ● "Before taking a photo ..."

This is the auto action explained in "15. Effective Small Techniques".

Hide extra depictions before shooting. (Page numbers, guide lines, dragonflies ...)

 

If the manuscript is written out as it is, extra information may be reflected.

Therefore, the next auto action is stowawayed and unnecessary ones are hidden.

After shooting, you can create an auto action to restore it.

This time, I will end it without saving. (important!)

 

Note! : The name, etc. of the part marked with ★ differs depending on the PC environment, so "rewrite" or

It is necessary to "delete".

 

 

● Auto action: "Before taking a photo ...

If the manuscript is written out as it is, extra information may be reflected.

Therefore, the next auto action is stowawayed and unnecessary ones are hidden.

After shooting, you can create an auto action to restore it.

This time, I will end it without saving. (important!)

 

Note! : The name, etc. of the part marked with ★ differs depending on the PC environment, so "rewrite" or

It is necessary to "delete".

 

03 ● Structure conversion for spread transition

It is an auto action of the operation explained in "03: Manuscript and work format".

 

04 ● Auto-action of logical processing of mask area

When executing an auto action on the user's arbitrary layer palette, the target layer

Since the name is not unique, the process will be NG.

 

<User pre-operation / processing>

To avoid this, at the beginning of the process on the user side,

Copy the two target layers to the "★ Results folder" or use the same auto-action

Please create a statement.

 

In the commentary operation, "stock selection" was used for the operation to take "selection",

Raster layer because "stock selection" cannot be operated with auto action

Use the.

 

◆ 01 area P / Q logical product (AND)

・ Store area A and area B in one folder.

・ Logical formula: / (/ A + / B) Pay attention to.

・ Create an out-of-range (/ A) of area A. → ★ Color the layer of area P.

・ Create an out-of-range (/ B) of area B. → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ Invert the result. → Invert the selection range.

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

P ・ Q≡A ・ B≡ // (A ・ B) ≡ / (/ A + / B) ≡ / (mA + mB)

≡ Negation (OR of mA and mB) ≡ NOR of mA and mB

・ Mask area: Inversion (/ (mA + mB)) ≡ / (/ (mA + mB)) ≡ mA + mB

OR of ≡mA and mB ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥

 

◆ 02 OR of areas P and Q (OR)

・ Store area A and area B in one folder.

・ Logical formula: (A + B) Pay attention to.

・ Create a range (A) of area A. → ★ Color the layer of area P.

・ Create a range (B) of area B. → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

P + Q≡A + B≡ // (A + B) ≡ / (/ A // B) ≡ / (mA ・ mB)

≡ Negation (AND of mA and mB) ≡ NAND of mA and mB

・ Mask area: Inversion (/ mA ・ mB)) ≡ / (/ (mA ・ mB)) ≡ mA ・ mB

AND of ≡mA and mB

 

◆ 03 Logical difference between areas P and Q (-)

・ Store area A and area B in one folder.

・ Logical formula: / (/ A + / (/ B)) ≡ / (/ A + B).

・ Create outside the range of area A (￢A). → ★ Color the layer of area P.

・ Create a range (B) of area B. → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ Invert the result. → Invert the selection range.

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

PQ≡AB≡A ・ (/ B) ≡ // (A ・ (/ B)) ≡ / (/ A + / (/ B))

≡ // A ・ (/ B) ≡ / mA ・ mB

・ Mask area: Inversion (/ mA ・ mB) ≡ / (/ mA ・ mB) ≡ mA + / mB

・ If you want to get the opposite result, execute the following.

QP≡BA

 

◆ 04 area P / Q negative logical product (NAND) <reverse of 01>

・ Store area A and area B in one folder.

・ Logical formula: (/ A + / B) Pay attention to.

・ Create outside the range of area A (￢A). → ★ Color the layer of area P.

・ Create outside the range of area B (￢B). → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ ---------- None ------------

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

/ (P ・ Q) ≡ / (A ・ B) ≡ / A + / B≡mA + mB≡mA and mB OR

・ Mask area: Inversion (mA + mB) ≡￢ (mA + mB) ≡ mA and mB NOR

 

 

◆ 05 area P / Q negative logical sum (NOR) <reverse of 02>

・ Store area A and area B in one folder.

・ Pay attention to the logical formula: / (A + B).

・ Create a range (A) of area A. → ★ Color the layer of area P.

・ Create a range (B) of area B. → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ Invert the result. → Invert the selection range.

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

/ (P + Q) ≡ / (A + B) ≡ / A // B≡mA ・ mB≡mA and mB AND

・ Mask area: Inverted (mA ・ mB) ≡￢ (mA ・ mB) ≡ mA and mB NAND

 

◆ 06 Exclusive OR of areas P and Q (EOR, XOR)

・ Store area A and area B in one folder.

・ Logical formula: (A + B) ・ / (A ・ B) ≡ // ((A + B) ・ / (A ・ B))

≡ / (/ (A + B) + // (A / B)) ≡ / (/ (A + B) +/(/ A + / B))

Pay attention to.

・ Create a selection range (A) for area A. → ★ Color the layer of area P.

・ Create a selection range (B) for area B. → ★ Color the layer of area Q.

・ Take the logical sum of P and Q. → ★ Combine the layers of area P and ★ area Q

Create a layer for area R.

・ ★ Click the layer of area R to select the fill range.

・ Temporarily erase the fill in this selected area.

・ Invert the result. → Invert the selection range.

・ ★ Paint the layer of area R (/ (A + B)).

 

・ Create a selection range (/ A) for area A. → ★ Color the layer of area S.

・ Create a selection range (/ B) for area B. → ★ Paint the layer of area T.

OR the logical sum of S and T. → ★ Combine the layers of area S and ★ area T

Create a layer for area U.

・ ★ Click the layer of area U to select the fill range.

・ Temporarily erase the fill in this selected area.

・ Invert the result. → Invert the selection range.

・ ★ Paint the layer of area U (/ (/ A + / B)).

 

・ Take the logical sum of R and U. → ★ Combine the layers of area R and ★ area U

Create a layer for area V.

・ ★ Click the layer of area V to select the fill range.

・ Temporarily erase the fill in this selected area.

・ Invert the result. → Invert the selection range.

・ ★ Paint the layer of area V (/ (/ (A + B) + / (/ A + / B))).

 

・ Select a folder and select "Right click-> Layer mask-> Mask outside selection"

・ Unmask the two internal layers.

"Right-click the mask icon of the layer → delete the mask"

・ It is up to you to combine the two layers and mask them without creating a folder.

 

・ Logical formula (A mask area → / A → mA, B mask area → / B → mB)

(P + Q) // (P / Q) ≡ (A + B) // (A / B) ≡ // (A + B) / / (A / B)

≡ / (/ A ・ / B) ・ (/ A + / B) ≡ / (mA ・ mB) ・ (mA + mB)

・ Mask area: Inverted (/ (mA∧mB) ∧ (mA∨mB))

≡ / (/ (mA ・ mB) ・ (mA + mB)) ≡ ((mA ・ mB) + / (mA + mB))

05 ● Layer order change Auto action of alignment processing (current reverse order)

Replace the vertical order of the current layers.

Example 1: Top 1, top 2, top 3 ... Bottom 3, bottom 2, bottom 1

Change → Bottom 1, Bottom 2, Bottom 3 ... Top 3, Top 2, Top 1

Example 2: Top 01, Top 02, Top 03 ... Top 97, Top 98, Top 99

Change → Top 99, Top 98, Top 97 ... Top 03, Top 02, Top 01

 

Because auto action cannot be repeated

We have prepared auto actions for the first time, the number of times (1 to 5,10) processing, and the final.

For example,

・ When the layer is 3, the first time + 3 times continuation + final is executed.

・ When the layer is 8, execute the first time + 5 times of continuation + 3 times of continuation + final.

・ When the layer is 10, the first time + 10 times continuation + final is executed.

・ When the layer is 13, execute the first time + 10 times of continuation + 3 times of continuation + final.

・ When the layer is 23, for the first time + for 10 consecutive times + for 10 consecutive times + for 3 consecutive times + for the final

Execute ‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥

・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・

 

◆ OA0: For the first time

◆ OA1: For 1 time continuation ◆ OA2: For 2 times continuation ◆ OA3: For 3 times continuation

◆ OA4: For 4 consecutive times ◆ OA5: For 5 consecutive times ◆ OA6: For 10 consecutive times

◆ OA7: For final use

■: Change history

[Change history] (All)

・ 2020.10.03: Added "05 ● Layer order change and alignment processing auto action"

・ 2020.07.05: Added "04 ● Auto-action of logical processing of mask area"

・ 2020.06.21: Added "03 ● ..." item

・ 2020.06.16: Added description to "01 ● ..." item

・ 2020.05.17: CLIP STUDIO SHARE released

・ 2020.04.30: Addition of Auto Action 02 "Before taking a picture ..."

・ 2020.04.28: First edition-TIPS released

・ 2020.03.24: First edition coming soon

 

■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■